Double joint, EGZM, R, igubal®

Dimensional series: E following DIN ISO 12240
Housing material: igumid G
Material of spherical ball: iglidur® R
Maintenance-free dry operation
Mechanical joining link between two components
Compensation of misalignment errors
Corrosion-resistant
Double joint turned 90° available upon request

Är du osäker på om det passar?

Product description

igubal® spherical bearings

The use of spherical bearings is usually associated with high weight bearing materials, difficult installation, and high costs. Most of the time, maintenance is still necessary over the long-term, and the bearings are only corrosion-resistant in special designs. Often roller bearings or plain bearings malfunction prematurely due to high edge loads, or because they need to be elaborately readjusted, reamed, or refitted in order to compensate for alignment errors. igubal® spherical bearings put an end to all of these disadvantages and open up many new possibilities for your engineering design: they are easy to handle, cost-effective, lightweight and robust.

The housing is made from igumid G, an extremely impact-resistant, long-fibre-reinforced polymer. Suitable for temperatures from -30 °C to +80 °C in long-term use.

Here, the spherical ball is manufactured from iglidur® R, which is a low-cost material with low coefficients of friction and good wear resistance at low to medium loads.

Maintenance-free dry operation
Mechanical joining link between two components
Compensation of misalignment errors
Corrosion-resistant

Typical application areas

Food industry
Railway technology
Automotive industry
Plant construction

You will find plenty of additional application areas at our Branschlösningar

When to use it?

For high axial and radial loads
When easy installation is required
In case of cramped installation space
If chemical resistance is required
If a cost-effective option is required
If you need dirt-resistant bearings
To adjust misalignments

When not to use it?

If temperatures are higher than +80 °C
If diameters above 12 mm are required
If rotation speeds higher than 0.5 m/s are required

Använd dig av våra filtermöjligheter för att hitta rätt produkt

Tolerances
Maintenance-free igubal® spherical bearings have a tolerance in the inner diameter of E10. The shaft tolerance should be between h6 and h9. The bearing clearance allows for expansion of the bearings due to increasing temperatures. Provning av innerdiametern

Assembly
igubal® spherical bearings are press-fitted into a recommended H7 housing bore and axially secured. Exact alignment of the bearing housing is not necessary since the spherical bearing automatically compensates for alignment errors.

Tekniska data

Onlineverktyg

Produktfinder för ledlager

Snabbt till rätt ledlager. Efter några få klick visar igubal® produktfinder dig passande ledlagerlösning speciellt för din applikation..

Expert för ledlager

Beräkna nu den förväntade livslängden för igubal® ledlager med hjälp av några få uppgifter.

Nedladdningar

Andra lösningar

Clip bearing, heavy duty, ECLM-HD, igubal®

For high axial and radial loads, dimensional series E

från 83,22 SEK/Pc.

Spherical bearing, KGLI, inch, igubal®

Classic design, easy assembly, dimensional series K

från 37,07 SEK/Pc.

Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® J4V

Simple assembly, two mounting holes, dimensional series E

från 85,49 SEK/Pc.

Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® R

Simple assembly, two mounting holes, dimensional series E

från 61,10 SEK/Pc.

Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® R

For higher radial loads, four mounting holes, dimensional series E

från 70,74 SEK/Pc.

Clip bearing, maximum compensation of tolerances, EGFM-T R, igubal®

Tolerance compensation, dimensional series E

från 72,24 SEK/Pc.

Pillow block bearing, ESTM, R, igubal®

Simple assembly, two mounting holes, dimensional series E

från 47,10 SEK/Pc.

Spherical insert bearing, JEM, narrow, mm, igubal®

For metal bearing housings, low moisture absorption, dimensional series E

från 298,85 SEK/Pc.

Spherical ball, cost-effective, RKM, mm, igubal®

Low-cost, dimensional series K

från 32,71 SEK/Pc.

Spherical ball, splittable, low level of moisture absorption, JKM-GT, mm, igubal®

Splittable, low moisture absorption, dimensional series K

från 203,70 SEK/Pc.

Spherical ball for underwater applications, UWEM, mm, igubal®

For underwater applications, dimensional series E - slim version

från 23,37 SEK/Pc.

Spherical ball, clearance-free, J4VEM, mm, igubal®

Clearance-free, low-cost, low moisture absorption, dimensional series E

från 26,67 SEK/Pc.

Spherical insert bearing, A350EM, narrow, mm, igubal®

For metal bearing housings, FDA-compliant, dimensional series E

från 371,66 SEK/Pc.

Spherical ball, WEI, inch, igubal®

Standard material, dimensional series E - narrow version

från 32,53 SEK/Pc.

Angled ball and socket joint, WGLM LC, low cost, igubal®

Low-cost, left-hand thread, with plastic ball stud

från 23,83 SEK/Pc.

Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®

Low-cost, right-hand thread, with metal ball stud

från 59,31 SEK/Pc.

Angled ball and socket joint, WGRM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of polymer

från 70,56 SEK/Pc.

In-line ball and socket joint, AGLM, igubal®

Left-hand thread, with spherical cap, with plastic ball stud

från 37,64 SEK/Pc.

In-line ball and socket joint, AGLM LC, low-cost igubal®

Low-cost, left-hand thread, with plastic ball stud

från 25,91 SEK/Pc.

Adapter screw, PKRM, igubal®

Right-hand thread

från 94,20 SEK/Pc.

Clevis joint with pin and circlip, GELMK, igubal®

Left-hand thread

från 39,91 SEK/Pc.

Clevis joint with spring-loaded fixing clip, GELMF, igubal®

Left-hand thread

från 41,42 SEK/Pc.

Clevis joint with spring-loaded fixing clip and rod end bearing, GELMFE, igubal®

Left-hand thread

från 105,16 SEK/Pc.

igubal® pillow block bearing, KSTM

Compensation of misalignments, two mounting holes, dimensional series K

från 64,69 SEK/Pc.

Pillow block bearing, ESTM, W300, igubal®

Simple assembly, two mounting holes, dimensional series E

från 53,53 SEK/Pc.

Pillow block bearing, ESTM-GT-GT, igubal®

Quick assembly, split, two mounting holes, dimensional series E

från 101,38 SEK/Pc.

igubal® AD-01-ESTM adapter for pillow block bearings

Accessory, for pillow block bearings of the dimensional series E

på förfrågan

Flange bearing with 4 mounting holes and split housing, KFSM GT igubal®, spherical ball iglidur® J

High stiffness, split housing, four mounting holes, dimensional series E

från 394,73 SEK/Pc.

High-temperature flange bearings with 2 mounting holes, EFOM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, easy assembly, two mounting holes, dimensional series E

från 143,37 SEK/Pc.

High-temperature flange bearings with 4 mounting holes, EFSM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, for high radial loads, four mounting holes, dimensional series E

från 157,37 SEK/Pc.

Spherical bearing, EGLM, igubal®

Space saving, dimensional series E

från 66,40 SEK/Pc.

Spherical thrust bearing, SAM, igubal®

Compensation of misalignment errors

från 45,58 SEK/Pc.

Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® J4V

For higher radial loads, four mounting holes, dimensional series E

från 90,40 SEK/Pc.

Spherical bearing, low cost, KGLM LC, J4, igubal®

Cost-effective, simple assembly, dimensional series K

från 45,21 SEK/Pc.

Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®

Tolerance compensation, dimensional series E

från 80,38 SEK/Pc.

Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®

Tolerance compensation, dimensional series E

från 154,71 SEK/Pc.

Double joint, EGZM, J4VEM, igubal®

Robust plastic, dimensional series E

på förfrågan

Angled ball and socket joint, WGLM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of galvanised steel

från 70,56 SEK/Pc.

Variable coupling joint, WDGM, with ball studs, igubal®

Individual alignment of the bearing position

från 110,19 SEK/m

Variable double joint, KDGM, R, igubal®

Individual alignment of the bearing position

från 184,30 SEK/Pc.

Variable double joint, KDGM, EK, igubal®

Individual alignment of the bearing position

från 270,18 SEK/Pc.

Clevis joint, GERI, igubal®

Right-hand thread

från 35,37 SEK/Pc.

Spherical bearing, slim line, KGLI SL, igubal®

For extremely small installation space, dimensional series K

från 38,78 SEK/Pc.

Clevis joint with pin and circlip, GERIK, igubal®

Right-hand thread

från 39,93 SEK/Pc.

Split pillow block bearing for square profiles, ESQM, igubal®

Easy assembly and disassembly

från 1 229,41 SEK/Pc.

Clip bearing with galvanised steel ball studs, igubal®

Connection for rotating and pivoting movements

från 50,12 SEK/Pc.

Ball stud made of tribo-plastic with male thread, GZRM, igubal®

Ball stud made of Tribo plastic

från 8,50 SEK/Pc.

Interchangeable spherical ball, moulded, JEM-SP, mm, igubal®

Low moisture absorption, dimensional series E

från 65,26 SEK/Pc.

Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®

High holding forces when assembled

från 544,67 SEK/m

Land/Region

Genom att välja ditt land kommer du att se lokala erbjudanden och information.

Vänligen välj din leveransort