drylin® E stepper motor with connector, encoder and brake, NEMA 17
1 of 4
Installation size: NEMA17/flange dimension 42mm
Protection class: Motor housing IP65 (shaft seal IP52)
Holding torque: 0.50Nm
Rated current: 1.80A
Motor connections: Metric M8/M12 connectors
Brake voltage: 24V
Integrated brake for vertical loads
NEMA17: Small, but lots of power
This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads.
Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection.
The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.
The brake can hold the payload in position when the motor is not under power. This is used as a safety feature during power failures – strongly recommended for vertically mounted systems.