Vänligen välj din leveransort

Valet av landssida kan påverka olika faktorer som t.ex. pris, möjliga leveranssätt och produkttillgänglighet.
Min kontaktperson
igus® AB

Berga Allé 1

254 52 Helsingborg

+46 42 329270
+46 42 211585
SE(SV)

Robot and motor control systems

The cost-effective and individually adaptable robot arms from igus® can be supplemented with different control concepts. A solution is available in the form of the industrial control system that is made by the company Commonplace Robotics GmbH and has been specially designed for robolink® D. It is supplied with an easy-to-use software. With the help of the software, the motion sequences of the robot are displayed and can be programmed and controlled in a manner that is easy to understand. The modular robolink® principle makes the robot arms usable with a self-programmed controller as well, thus offering maximum modularity. Due to the combination of robolink® gripper arm and control system, monotonous tasks, e.g. in quality assurance, assembly or commissioning, can be automated easily and the work sequences can also be coordinated effortlessly.
 

Antal produkter: 23

D1 assembly kit for 2-axis kinematics

Product information
  • Set of 2x igus® D1 dryve, proximity switches incl. bracket, connection cables with straight connector in 10m length
 
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen gateway) for connection to master control systems, e.g. Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation here before you buy 
från 22 598,70 SEK/Pc.
1 artiklar, varav klara för leverans från Tyskland:
1 Redo att skickas inom 5 arbetsdagar från lager i Köln
Till produktsidan

igus® Robot Control (iRC) software for gantries & delta robots

Product information
  • Diverse automation tasks with simple programming software
  • For gantries and delta robots
  • Easy software installation for Windows 10
  • Use with a PC or tablet
  • Seven digital inputs/outputs, CRI interface, ModbusTCP/IP for connection to master control systems, e.g. Siemens or Beckhoff
  • 10m cable length

You can find all relevant documents in the downloads below.

TEST BEFORE INVEST - Test the robot control system before you buy it with the igus® Robot Control software 
från 47 083,90 SEK/Pc.
2 artiklar, varav klara för leverans från Tyskland:
2 Redo att skickas inom 3-4 veckor från lager i Köln
Till produktsidan

igus Robot Control Handheld

Product information
  • Handheld enables the robot to be commissioned and moved
  • Suitable for the igus Robot Control
  • Convenient operation for left and right-handers
  • User-friendly operation via touch display
från 18 132,66 SEK/Pc.
1 artiklar, varav klara för leverans från Tyskland:
1 Redo att skickas inom 1-2 veckor från lager i Köln
Till produktsidan

D1 assembly kit for 3-axis kinematics

Product information
  • Set of 3x igus® D1 dryve, proximity switches incl. bracket, connection cables with straight connector in 10m length
 
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen gateway) for connection to master control systems, e.g. Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation here before you buy 
från 33 898,05 SEK/Pc.
1 artiklar, varav klara för leverans från Tyskland:
1 Redo att skickas inom 5 arbetsdagar från lager i Köln
Till produktsidan

The robot control system igus® Robot Control for Scara and articulated arm robots

Product information
  • Diverse automation tasks with simple programming software
  • For SCARA robots and articulated arm robots
  • Easy software installation for Windows 10
  • Use with a PC or tablet
  • Seven digital inputs/outputs, CRI interface, ModbusTCP/IP for connection to master control systems, e.g. Siemens or Beckhof
  • 10m cable length

You can find all relevant documents in the downloads below.

TEST BEFORE INVEST - Test the robot control system before you buy it with the igus® Robot Control software 
från 47 083,90 SEK/Pc.
2 artiklar, varav klara för leverans från Tyskland:
2 Redo att skickas inom 3-4 veckor från lager i Köln
Till produktsidan

igus Robot Control I/O Modul

Product information
  • Extension to 7 additional digital inputs and outputs
  • Suitable for the igus Robot Control
  • Plug&Play solution
från 4 732,77 SEK/Pc.
1 artiklar, varav klara för leverans från Tyskland:
1 Redo att skickas inom 1-2 veckor från lager i Köln
Till produktsidan

7th axis | UR Cap + switch cabinet integration - 0.3m/s version

Product information
  • Simple integration in Universal Robots with UR CAP
  • Plug & play solution ready for connection
  • Control cabinet version
  • Cable set: 3 m
  • Max. speed: 0.3 m/s

Optionally available
från 39 732,93 SEK/Pc.
1 artiklar, varav klara för leverans från Tyskland:
1 Redo att skickas inom 1-2 veckor från lager i Köln
Till produktsidan

igus Robot Control motor modul

Product information
  • Extension of a motor module
  • Suitable for the igus Robot Control
  • Control of additional axes possible
  • Plug & Play solution
från 6 975,17 SEK/Pc.
2 artiklar, varav klara för leverans från Tyskland:
2 Redo att skickas inom 1-2 veckor från lager i Köln
Till produktsidan

drylin® D1 motor control system for stepper, DC and EC/BLDC motors

  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen Gateway) for connection to master control systems such as Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation here before you buy 
från 8 310,36 SEK/Pc.
1 artiklar, varav klara för leverans från Tyskland:
1 Redo att skickas inom 5 arbetsdagar från lager i Köln
Till produktsidan

D1 control system set for 3-axis kinematics

Product information 
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen gateway) for connection to master control systems, e.g. Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation here before you buy 
från 24 931,08 SEK/Pc.
1 artiklar, varav klara för leverans från Tyskland:
1 Redo att skickas inom 5 arbetsdagar från lager i Köln
Till produktsidan

D1 control system set for 2-axis kinematics

Product information 
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen gateway) for connection to master control systems, e.g. Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation here before you buy 
från 16 620,72 SEK/Pc.
1 artiklar, varav klara för leverans från Tyskland:
1 Redo att skickas inom 5 arbetsdagar från lager i Köln
Till produktsidan

7th axis | Switch cabinet integration - IO version

Product information
  • Easy integration with lightweight robots
  • Plug & play solution ready for connection
  • Control cabinet
  • Cable set: 3 m
  • Max. speed: 0.3 m/s
 
Optionally available
från 39 733,09 SEK/Pc.
1 artiklar, varav klara för leverans från Tyskland:
1 Redo att skickas inom 1-2 veckor från lager i Köln
Till produktsidan

drylin® D3 for direct current motors

  • Simple automation directly using the control system without software and/or PC
  • Operation with limit switch or via power consumption
  • Left/right operation and speed control directly on the housing
  • Option for external switches/joysticks
  • Various modes of operation, such as tip operation and start to finish (semi-automatic)
  • Various adjustable acceleration ramps
  • Power supply via 24V/2.5A
     
    All relevant documents for dryve D3 can be found in the downloads.
från 2 245,50 SEK/Pc.
1 artiklar, varav klara för leverans från Tyskland:
1 Redo att skickas inom 5 arbetsdagar från lager i Köln
Till produktsidan

7th axis | EPSON Cap + switch cabinet integration

Product information
  • Easy integration with Epson robots
  • Plug & play solution ready for connection
  • Control cabinet
  • Cable set: 3 m
  • Max. speed: 0.3 m/s

Optionally available
från 39 732,93 SEK/Pc.
1 artiklar, varav klara för leverans från Tyskland:
1 Redo att skickas inom 1-2 veckor från lager i Köln
Till produktsidan

Controller kit D7 for 2-axis-kinematics

Product information
  • Without connection cables
  • Set consists of 2x drylin D7
 
  • Can control stepper motors with up to 2.7 A continuous current at supply voltage of up to 48 V
  • Ready to use immediately
  • Easy control
  • Exact positioning
från 2 370,14 SEK/Pc.
1 artiklar, varav klara för leverans från Tyskland:
1 Redo att skickas inom 5 arbetsdagar från lager i Köln
Till produktsidan

Rådgivning

I would be happy to answer your questions personally

Frakt och konsultation

Personligen:

Måndag till fredag från 07.00 till 20.00.
Lördagar från 08.00 till 12.00.

Online:

24h


Termerna "Apiro", "AutoChain", "CFRIP", "chainflex", "chainge", "chains for cranes", "ConProtect", "cradle-chain", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "dryway", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-loop", "energy chain", "energy chain systems", "enjoyneering", "e-skin", "e-spool", "fixflex", "flizz", "i.Cee", "ibow", "igear", "iglidur", "igubal", "igumid", "igus", "igus improves what moves", "igus:bike", "igusGO", "igutex", "iguverse", "iguversum", "kineKIT", "kopla", "manus", "motion plastics", "motion polymers", "motionary", "plastics for longer life", "print2mold", "Rawbot", "RBTX", "readycable", "readychain", "ReBeL", "ReCyycle", "reguse", "robolink", "Rohbot", "savfe", "speedigus", "superwise", "take the dryway", "tribofilament", "triflex", "twisterchain", "when it moves, igus improves", "xirodur", "xiros" och "yes" är rättsligt skyddade varumärken som tillhör igus® GmbH/Köln i Förbundsrepubliken Tyskland och i förekommande fall i vissa andra länder. Detta är en icke uttömmande lista över varumärken (t.ex. pågående varumärkesansökningar eller registrerade varumärken) som tillhör igus GmbH eller igus dotterbolag i Tyskland, Europeiska unionen, USA och/eller andra länder eller jurisdiktioner.

igus® GmbH hänvisar till att vi inte säljer några produkter från företagen Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsibushi, NUM, Parker, Bosch Rexroth, SEW, Siemens, Stöber och alla andra drivenhetstillverkare som nämns på denna webbplats. De produkter som igus® erbjuder är produkter från igus® GmbH