Spherical bearing, slim line, KGLM SL igubal®

Dimensional series: K, following DIN ISO 12240
Housing material: RN33
Material of spherical ball: iglidur® W300
Very small installation space
Wall thickness halved compared to KGLM
Angular compensation up to 5°
Lightweight
Dimensions according to DIN 1850

Är du osäker på om det passar?

Nedladdning av CAD-data

Begär gratis varuprov

Ask the expert

igubal contact request

igubal® sample box

Order free of charge

Product description

igubal® spherical bearing

The use of spherical bearings is usually associated with high weights of the bearings, difficult installation and high costs. In most cases, however, maintenance is required in the longer term and the bearings are only corrosion-free in special designs. Often roller bearings or plain bearings malfunction prematurely due to high edge loads, or because they need to be readjusted, reamed, or refitted in order to compensate for alignment errors. igubal® spherical bearings ends these disadvantages and opens up new possibilities through their design: They are easy to handle, cost-effective, very lightweight and very robust.

The housing is made of RN33, a particularly impact-resistant, long-fibre reinforced polymer. Suitable for temperatures from -30°C to +80°C in long-term use.

In standard spherical bearings, the spherical ball is made from iglidur® W300, a material known for low coefficient of friction in dry running operations and has an extremely low tendency to stick-slip. This is especially important for low loads and very slow movements.

Very small installation space
Wall thickness halved compared to KGLM
Angular compensation up to 5°
Lightweight

Typical applications

Food industry
Railway technology
Automotive industry
Plant engineering

You can find many other areas of application at our Branschlösningar

When do I need it?

When I have high axial and radial load
For the simplest installation
When extremely small installation spaces are available
When chemical resistance is required
If a cost-effective alternative is needed
When dirt-resistant bearings are required
If misalignments are to be compensated

When do I not need it?

If temperatures are higher than +80°C
If diameters above 30 mm are required
If rotation speeds of more than 0.5 m/s are to be achieved

Använd dig av våra filtermöjligheter för att hitta rätt produkt

Tolerances
Maintenance-free igubal® spherical bearings are designed with a tolerance in the inner diameter according to E10. The shaft tolerance should be between h6 and h9. The bearing clearance allows for expansion of the bearings due to increasing temperatures.Provning av innerdiametern

Assembly
igubal® spherical bearings are press-fitted into a recommended H7 hole and axially secured. Exact alignment of the bearing housing is not necessary since the spherical bearing automatically compensates for alignment errors.

Tekniska data

Onlineverktyg

Expert för ledlager

Beräkna nu den förväntade livslängden för igubal® ledlager med hjälp av några få uppgifter.

Nedladdningar

Andra lösningar

Spherical ball, cost-effective, RKM, mm, igubal®

Low-cost, dimensional series K

från 32,71 SEK/Pc.

Spherical ball, splittable, low level of moisture absorption, JKM-GT, mm, igubal®

Splittable, low moisture absorption, dimensional series K

från 203,70 SEK/Pc.

Spherical ball for underwater applications, UWEM, mm, igubal®

For underwater applications, dimensional series E - slim version

från 23,37 SEK/Pc.

Spherical ball, clearance-free, J4VEM, mm, igubal®

Clearance-free, low-cost, low moisture absorption, dimensional series E

från 26,67 SEK/Pc.

Spherical insert bearing, A350EM, narrow, mm, igubal®

For metal bearing housings, FDA-compliant, dimensional series E

från 371,66 SEK/Pc.

Spherical ball, WEI, inch, igubal®

Standard material, dimensional series E - narrow version

från 32,53 SEK/Pc.

Angled ball and socket joint, WGLM LC, low cost, igubal®

Low-cost, left-hand thread, with plastic ball stud

från 23,83 SEK/Pc.

Angled ball and socket joint, WGRM LC, low cost, with steel pins, igubal®

Low-cost, right-hand thread, with metal ball stud

från 59,31 SEK/Pc.

Angled ball and socket joint, WGRM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of polymer

från 70,56 SEK/Pc.

In-line ball and socket joint, AGLM, igubal®

Left-hand thread, with spherical cap, with plastic ball stud

från 37,64 SEK/Pc.

In-line ball and socket joint, AGLM LC, low-cost igubal®

Low-cost, left-hand thread, with plastic ball stud

från 25,91 SEK/Pc.

Adapter screw, PKRM, igubal®

Right-hand thread

från 94,20 SEK/Pc.

Clevis joint with pin and circlip, GELMK, igubal®

Left-hand thread

från 39,91 SEK/Pc.

Clevis joint with spring-loaded fixing clip, GELMF, igubal®

Left-hand thread

från 41,42 SEK/Pc.

Clevis joint with spring-loaded fixing clip and rod end bearing, GELMFE, igubal®

Left-hand thread

från 105,16 SEK/Pc.

Pillow block bearing, KSTM-GT, igubal®

Split, two mounting holes, dimensional series K

från 394,73 SEK/Pc.

igubal® pillow block bearing, KSTM

Compensation of misalignments, two mounting holes, dimensional series K

från 64,69 SEK/Pc.

Pillow block bearing, ESTM, W300, igubal®

Simple assembly, two mounting holes, dimensional series E

från 53,53 SEK/Pc.

Pillow block bearing, ESTM-GT-GT, igubal®

Quick assembly, split, two mounting holes, dimensional series E

från 101,38 SEK/Pc.

igubal® AD-01-ESTM adapter for pillow block bearings

Accessory, for pillow block bearings of the dimensional series E

på förfrågan

Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® W300

For higher radial loads, four mounting holes, dimensional series E

från 78,68 SEK/Pc.

Flange bearing with 4 mounting holes and split housing, KFSM GT igubal®, spherical ball iglidur® J

High stiffness, split housing, four mounting holes, dimensional series E

från 394,73 SEK/Pc.

High-temperature flange bearings with 2 mounting holes, EFOM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, easy assembly, two mounting holes, dimensional series E

från 143,37 SEK/Pc.

High-temperature flange bearings with 4 mounting holes, EFSM-HT, igubal®, spherical ball iglidur® X

For temperatures up to 200 °C, for high radial loads, four mounting holes, dimensional series E

från 157,37 SEK/Pc.

Spherical bearing KGLM, W300, igubal®

Classic design, easy assembly, dimensional series K

från 26,48 SEK/Pc.

Spherical bearing, low cost, KGLM LC, igubal®

Cost-effective, simple assembly, dimensional series K

från 38,21 SEK/Pc.

Spherical bearing, slim line, KGLM SL igubal®

For extremely small installation space, dimensional series K

från 42,55 SEK/Pc.

Spherical bearing, EGLM, igubal®

Space saving, dimensional series E

från 66,40 SEK/Pc.

Clip bearing, heavy duty, ECLM-HD, igubal®

For high axial and radial loads, dimensional series E

från 83,22 SEK/Pc.

Spherical bearing, KGLI, inch, igubal®

Classic design, easy assembly, dimensional series K

från 37,07 SEK/Pc.

Spherical thrust bearing, SAM, igubal®

Compensation of misalignment errors

från 45,58 SEK/Pc.

Flange bearings with 2 mounting holes, EFOM, igubal®, spherical ball iglidur® J4V

Simple assembly, two mounting holes, dimensional series E

från 85,49 SEK/Pc.

Flange bearings with 4 mounting holes, EFSM, igubal®, spherical ball iglidur® J4V

For higher radial loads, four mounting holes, dimensional series E

från 90,40 SEK/Pc.

Spherical bearing, low cost, KGLM LC, J4, igubal®

Cost-effective, simple assembly, dimensional series K

från 45,21 SEK/Pc.

Clip bearing, maximum compensation of tolerances, EGFM-T J4V, igubal®

Tolerance compensation, dimensional series E

från 80,38 SEK/Pc.

Clip bearing, maximum compensation of tolerances, EGFM-T UW, igubal®

Tolerance compensation, dimensional series E

från 154,71 SEK/Pc.

Double joint, EGZM, J4VEM, igubal®

Robust plastic, dimensional series E

på förfrågan

Angled ball and socket joint, WGLM DE, removable, igubal®

Simple assembly and disassembly, right-hand thread, with ball stud made of galvanised steel

från 70,56 SEK/Pc.

Variable coupling joint, WDGM, with ball studs, igubal®

Individual alignment of the bearing position

från 149,20 SEK/m

Variable double joint, KDGM, R, igubal®

Individual alignment of the bearing position

från 224,78 SEK/Pc.

Variable double joint, KDGM, EK, igubal®

Individual alignment of the bearing position

från 388,17 SEK/Pc.

Clevis joint, GERI, igubal®

Right-hand thread

från 35,37 SEK/Pc.

Spherical bearing, slim line, KGLI SL, igubal®

For extremely small installation space, dimensional series K

från 38,78 SEK/Pc.

Clevis joint with pin and circlip, GERIK, igubal®

Right-hand thread

från 39,93 SEK/Pc.

Split pillow block bearing for square profiles, ESQM, igubal®

Easy assembly and disassembly

från 1 229,41 SEK/Pc.

Clip bearing with galvanised steel ball studs, igubal®

Connection for rotating and pivoting movements

från 50,12 SEK/Pc.

Ball stud made of tribo-plastic with male thread, GZRM, igubal®

Ball stud made of Tribo plastic

från 8,50 SEK/Pc.

Interchangeable spherical ball, moulded, JEM-SP, mm, igubal®

Low moisture absorption, dimensional series E

från 65,26 SEK/Pc.

Variable coupling joint, WDGM-DE, with ball studs, removable, igubal®

High holding forces when assembled

från 544,67 SEK/m

Land/Region

Genom att välja ditt land kommer du att se lokala erbjudanden och information.

Vänligen välj din leveransort